How Do I Reset My Lorex DVR?

How do I reset my DVR admin password?

To reset password of your CCTV DVR press and hold the ENTER button for 15 to 30 second until the DVR restart’s.

After the restart you DVR default wizard will come up the same way like if you are setting up the DVR for the first time..

How do I log into my Lorex DVR?

To log in and set up your Lorex Client 11 software:Launch the Lorex Client 11 software on your computer.In the IP Address field, enter the DDNS or local IP address of your DVR.Enter your User Name.Enter the Password.Enter the Client Port value (default: 9000).Click Login.

What is Lorex camera password?

For those who must connect to IP cameras directly without the use of an NVR, the login information below is applicable to most Lorex IP cameras. Default login for most Lorex IP cameras: Username: admin. Password: admin.

Where is the reset button on Lorex DVR?

The reset button should be a black circle and you’ll be able to press it. Note that in this DVR/NVR model the reset push button is located at the corner of the motherboard.

How do I reset my Lorex DVR without monitor?

To reset your monitor connection:Power off the monitor.Power cycle your DVR / NVR. To power cycle your DVR / NVR, please power off and disconnect the power source for approximately 30 seconds. Reconnect the power source.Power on your monitor.Power on your DVR / NVR system.

How do I reset my DVR to factory settings?

Factory Reset InstructionsFirst, make sure that the unit is turned off.Then press and hold any button on the included infrared remote control.While holding the button on the remote, power on the unit.You should hear a single beep followed by a double beep. … Now that the DVR is booted, it will be set to the factory default settings.

Why are my Lorex cameras not working?

Verify the camera is firmly connected to the power adapter, and the power adapter is connected to a functional outlet. Cover the camera lens. … If the camera’s image displays when using a new port, try the initial port again, reconnecting may trigger camera video feed display. Try a different BNC or Ethernet cable.

How do I reset my Lorex DVR password?

If you are able to locate the reset button, follow this procedure to reset the Lorex DVR/NVR to factory default:Power off the DVR/NVR.Press and hold the reset push button.Power on the DVRNVR.Keep the reset push button pressed for 30 seconds.After you see the startup wizard on the screen, create a new password.

What is the default password for Lorex DVR?

A: The default user name for the DVR is admin and the default password is 000000. Passwords are disabled by default, but are required to access certain local DVR functions. The DVR has seperate passwords for remote connection using a web browser or mobile device (such as a smartphone or tablet).